Cole Lighting


Products» Steplites » 600 Series » L600 Series


L600 Series


Description
This directional Steplite features high performance LEDs. Its unique optical design
provides impressive forward-throw while eliminating any visible light above horizontal.
The rugged construction, engineering excellence, and quality make this fixture ideal
for specification in most public areas.

Features
Choices of powder coated aluminum or brushed stainless steel faceplates provide a
sleek and modern appearance. Three LED positions available for a choice of cutoff.
Integral driver simplifies specifications and installation. Four sizes are available to meet
most needed requirements. Thru-wall models can adjust to varying wall thicknesses.

Application
The 600 Series Steplites are suitable for concrete pour/block wall and stud wall mounting
in indoor or outdoor installations. They are ideal in walls, ramps and stairwells where high
light levels are desirable.

Construction

  • Recessed housing is constructed from 16 gauge electro-galvanized steel,
    matte black powder-coated
  • Surface housing is constructed from 16 gauge satin finished stainless steel
    or .063" metallic silver powder coated aluminum
  • Faceplates are 3/16" metallic silver powder coated aluminum or satin finished
    stainless steel
    , passivated for maximum rust resistance
  • Fixtures are furnished with stainless steel socket head tamperproof screws
  • Diffuser is clear tempered glass, set in silicone sealant
  • Internal baffel is coated matte black to elliminate glare
  • Optional junction box is cast aluminum with polyester coating
  • cETLus listed installation in any wall construction and suitable for wet
    locations in any wall construction.
  • Thru-wall housings allow 1" of adjustment for varying wall thicknesses
    Min. 4" wall thickness to 5" wall thickness. 

Electrical

  • Fixture is wired with high performance LEDs positioned for 5°, 10°
    or 15° cutoff (5° is standard)

  • Intergral driver is universal voltage
  • Recessed housing provided with 1/2" conduit knockout on each side, suitable
    for 4 wire thru-wiring, 2 in and 2 out. Surface housing conduit entries can be
    specified on either the sides, bottom or back of housing.
  • Optional junction box allows 8 wire thru-wiring, 4 in and 4 out. Provided
    with two 1/2" tapped conduit entrances in the bottom and one 1/2" tapped
    conduit entrance in each side.